Numerical investigation of a convective hybrid nanofluids around a rotating sheet

Hybrid nanofluids are formulated with various kinds of base fluids. They are designed to provide good heat transfer performance. They can achieve this by dispersing various kinds of nanoparticles in the base materials. This new technology of formulating hybrid nanofluids has a wide range of applications in various industries such as solar energy, medical equipment, and aerospace. Keeping these applications in view, this study provides an insight into the effects of convective heat transport on a Hybrid nanofluid, across a rotating sheet with a variable heat source. In this investigation, the governing boundary layer partial differential equations were modified into the ordinary differential equations, by using the proper similarity transformations. Later, they were solved numerically, with the support of the Lobatto IIIA technique in MATLAB. The influence of the Richardson number on flow parameters was studied, and it was discovered that increasing Ri increases the velocity while decreasing temperature and concentration profiles. The impact of various other flow parameters on the flow fields and also on the behavior of Nusselt number, coefficient skin friction, and Sherwood number were studied and represented graphically. The outcomes were found to be in excellent accord when compared with quoted studies.     

Generation,validation and application of dynamic load profiles in flow measurement using cavitating Herschel–Venturi nozzles

Today, utility meters for water are tested for measurement behavior at stable operating conditions at specified flow rates as part of the approval process. The measurement error that occurs during start and stop or when changing between flow rates may not be taken into account. In addition, there are new technologies whose measuring behavior under real-world conditions is only known to a limited extend. To take these facts into account, a new method has been developed and tested to determine the measurement behavior of water meters under dynamic load profiles as they occur in the real application. For this purpose, a test rig for flow rate measurement was extended by a cavitation nozzle apparatus and the generation of dynamic load profiles was validated. For the cavitation nozzles used, possible factors influencing the flow rate, such as temperature and purity of the water as well as the upstream pressure were investigated. Using different types of domestic water meters, the applicability of the dynamic test procedure was demonstrated and the measurement behavior of the meters was characterised.     

Simulation studies on a rotating ring disk electrode: Effects of ionic migration with kinetic complication-disk results

In continuation to my previous work (Guha S. AIChE J. 2013;59(4):1390-1399), in this work, effects of ionic migration are evaluated for disk region of a rotating ring disk electrode system by numerically solving complex differential equations, developed for mass transfer along with kinetic complication in presence of ionic migration under limiting current condition. The system for simulation is 0.01 M Fe₂(SO₄)₃ solution with H₂SO₄ as supporting electrolyte. Simulation cases are presence and absence of ionic migration with kinetic complication (oxidation of Fe²⁺ to Fe³⁺ under O₂ pressure). Results show that concentration boundary layer thickness of reactant Fe³⁺ reduces appreciably and steady-state disk current reduces substantially in presence of migration. Simulated steady-state disk current in absence of migration case agrees well with published data. Results indicate higher Fe²⁺ concentration in presence of migration and thereby higher rate of oxidation of Fe²⁺ to Fe³⁺ at all rate constant values.     

两种3D打印用雾化Ti-6Al-4V粉末的对比研究

本研究分别利用水冷铜坩埚真空感应熔炼气雾化(VIGA-CC)和等离子旋转电极(PREP)两种技术制备出球形Ti-6Al-4V合金粉末,作者利用SEM、同步辐射CT扫描-三维重建和氩气含量测试等分析手段对不同粒径的Ti-6Al-4V合金粉末的孔洞缺陷和氩气含量、硬度值进行了表征。实验结果表明, VIGA-CC粉末粒度分布宽,细粉收得率较多,粉末粒度分布在40~180 μm之间, PREP粉末的粒度分布较窄,主要集中在110~180 μm之间；金属粉末内部的孔隙率、气体含量和孔尺寸随着粉末粒度的增大而增大,且同一粒径范围内VIGA-CC粉末的气孔概率多于PREP粉末；随着粉末粒径减小,粉末截面组织逐渐细化,其硬度值逐渐升高,整体上VIGA-CC粉末硬度值高于PREP粉末。     

Theoretical and Experimental Studies for the Transient Response of Cavity

During the transient state of aero-engine,cavity has evidently transient characteristics in the secondary air system.To investigate transient characteristics,theoretical and experimental studies were implemented for both static and rotating cavities.First of all,the typical transient response phenomena in secondary air system were investigated based on the basic concepts of the dynamic process.According to the basic theory of gas dynamics,the causes of transient phenomena were analyzed in two aspects,external disturbance,and system physical properties.Several dimensionless parameters were introduced to analyze the transient response characteristics of air system.Second,the experimental results of the static cavity indicated that the actual response time increased with the increase of the inlet pressure.The experimental results of the rotor-stator cavity showed that the low rotational speed on the response process had little effect,and the response time gradually increased when the speed continued to increase.Third,the test results of multiple components suggested that when the valve was opening the inlet pressure of the static cavity increased quickly and then reached a stable value,but the pressure of the static cavity,stable pressure cavity and rotor-stator chamber rose gradually.It was also obtained the actual response time of them was increased.The closer the measuring points were to the disturbance source,the shorter the delay time was.     

填料生物转盘对农村家庭生活污水的处理

根据目前我国农村生活污水处理的现状以及农村家庭污水水量、水质的特点,提出了一种家庭生活污水处理装置-填料生物转盘。该装置采用生物膜法工艺,结合生物转盘与生物滤池工艺的特点,运用设备一体化的设计理念,设计了一种运行管理简单、结构紧凑的一体化装置。通过实际运行考察了装置用于农村家庭生活污水处理的挂膜启动情况,以及污染物的去除效果。结果表明:填料生物转盘生物膜的驯化培养需要20天的时间,稳定运行期间对COD、NH4+-N、TN、TP的平均去除率分别稳定在75%、85%、65%和75%以上,出水COD、NH4+-N、TN优于城镇污水处理厂污染物排放标准(GB 18918-2002)一级A标准,出水TP达到一级B标准。装置运行管理操作简单,不需要专业技术人员,适合农村家庭污水的处理。     

基于Fluent的高压水射流喷嘴优化模拟研究

为了提高高压水射流技术的破煤效率,采用Fluent软件对高压水射流的喷嘴结构和几何参数进行了优化模拟。通过分析水射流的轴向速度和壁面静压分布,选择了最佳的喷嘴结构和几何参数。结果表明:圆柱形喷嘴的最大射流速度发生在喷嘴内部,而锥形和锥直形喷嘴的最大射流速度发生在喷嘴外部,且锥形和锥直形喷嘴的最大射流速度和最大压力均明显大于圆柱形喷嘴,考虑到水射流的附壁效应,锥形喷嘴为最佳选择。锥形喷嘴的最优几何参数为:喷嘴出口直径3 mm,喷嘴锥角7°,喷嘴长度9 mm。高压水射流喷嘴的优化对提高煤层瓦斯抽采效率具有重要意义。     

铝碳质长水口用低铝抗氧化涂层的研制

为抑制铝碳质长水口使用过程中石墨的氧化，其表面会涂覆含 20%~30%Al₂O₃的抗氧化涂层，但切割丝钢等特种钢冶炼过程必须严格控制钢液中夹杂的 Al₂O₃的含量，因此需要制备低氧化铝含量的抗氧化涂层。本文通过调节涂料组成、加水量和水玻璃加入量制备了低铝抗氧化涂层，并利用扫描电镜分析了抗氧化实验后试样断口的显微结构。结果表明：以粘土粉、钾长石粉和硅砂为主要原料，添加 10%硼砂的涂料可在 800 ℃形成良好的釉层，此时涂料中 A12O3的含量可降至 12%，得到了低铝涂料；当加入占涂料质量 80%的水和 40%的水玻璃时，涂层具有最佳的涂覆性能和抗氧化性能，涂层和长水口基体结合致密，保护了长水口中的石墨不被氧化。     

上水口环形吹氩对中间包内渣眼形成的影响

 中间包上水口环形吹氩可以在塞棒周围形成清洗钢液的环形气幕，同时部分氩气泡随钢液进入上水口内，可以减少非金属夹杂物在水口内壁的黏附，起到防止水口堵塞的作用。然而，不合理的吹氩量会导致中间包内液面渣层受过强的气液羽流冲击而形成渣眼，使得钢液裸露并发生二次氧化，严重影响铸坯质量。采用标准 k ε 湍流模型研究中间包内流体流动，采用DPM模型和VOF模型耦合方法，研究上水口环形吹氩条件下渣眼的形成及演化规律。结果表明，上水口环形吹氩在塞棒周围形成较强的上升流，塞棒上部邻近区域存在多个涡流区；在钢液涡流的影响下，中间包液渣下层远离塞棒区域，上层向塞棒区域迁移；随着吹氩量的增大，平均湍动能增大，塞棒附近钢液速度逐渐增大，钢渣界面钢液速度先增大后减小，渣眼边缘钢液速度先增大后减小然后再增大，速度与垂直方向夹角逐渐减小；增大吹氩量，中间包熔池液面形成以塞棒为中心的渣眼，渣眼面积逐渐增大。试验条件下不产生渣眼的临界吹氩量为4.2 L/min，对应的钢渣界面最大速度为0.247 m/s，与垂直方向夹角为70°。